Top Menu

Tag Archives | corrugators

Routine corrugator inspections are key to identifying potential issues

Tips for Optimizing Corrugator Performance and Avoiding Costly Alignment Issues

If you manufacture corrugated products you already know that the challenges are many – and that issues can be very costly. Since we started blogging in 2013, we have provided several educational posts on corrugators including a three-part series on the importance of corrugator alignment, an overview of why routine inspections should not be avoided, […]

Continue Reading 0
Routine corrugator inspections are key to identifying potential issues

Routine Corrugator Inspections Key to Identifying Potential Issues

In a perfect world, all components within your corrugating line would be installed on centerline, perpendicular (square) to the centerline, and level to earth. Then for many years, these components would stay perfectly aligned, continuously running at optimum speeds, and producing superior quality board. Unfortunately, this is not a perfect world! In the real world, […]

Continue Reading 0
CorHtPlt

Importance of Machine Alignment: Corrugators – Part 1

A corrugating client recently contacted OASIS about their desire to increase their machine’s operating speeds, while at the same time improving the quality of their board and reducing the amount of waste they were producing.  They needed to find a solution for correcting their delamination and twist warp problems. The Solution……..A Complete Corrugator Alignment Delamination, twist warp, […]

Continue Reading 0
optical alignment of corrugator

Packaging Company Sees Impressive Results after Corrugator Realignment

One of the largest packaging facilities in the Midwest requested an alignment survey of the double backer through the wet end of their corrugator. During the initial survey, OASIS found significant misalignment conditions. After a complete realignment of the machine, this facility has seen a marked improvement in production and supplied the following impressive data: The […]

Continue Reading 0